2016 - Australia - Specifications for Data Collection Equipment

286 Downloads

2016 - Australia - Specifications for Data Collection Equipment

Austroads has published 15 updated asset management test methods and spcifications.

Specification for Pavement Roughness Measurement with an Inertial Profilometer

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level pavement roughness measurement using an inertial profilometer.

Specification for Pavement Rutting Measurement with a Laser Profilometer

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level pavement rutting measurement using a laser profilometer.

Specification for Pavement Surface Texture Measurement with a Laser Profilometer

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level pavement surface texture measurement using a laser profilometer.

Pavement Roughness Measurement with an Inertial Profilometer

This test method defines the procedure for measuring the roughness of road pavements, determined from the direct measurement of the longitudinal profile of the road surface using an inertial profilometer.

Validation of an Inertial Profilometer for Measuring Pavement Roughness (Reference Device Method)

This test method defines the procedure for performing validation checks of the measurements of pavement roughness determined using an inertial profilometer, by comparing them to the measurements from a static or manual reference device.

Validation of an Inertial Profilometer for Measuring Pavement Roughness (Loop Method)

This test method defines the procedure for performing validation checks of the measurements of pavement roughness determined using an inertial profilometer.

Pavement Roughness Repeatability and Bias Checks for an Inertial Profilometer

This test method defines the procedure for conducting repeatability and bias measurement checks for roughness measurements made by an inertial profilometer.

Pavement Rutting Measurement with a Laser Profilometer

This test method defines the procedure for measuring the rutting of road pavements, determined by the direct measurement of the transverse profile of the road surface using a laser profilometer.

Validation of a Laser Profilometer for Measuring Pavement Rutting (Reference Device Method)

This test method defines the procedure for performing validation checks of the measurements of pavement rutting determined using a laser profilometer, by comparing them to the measurements from a static or manual reference device.

Validation of a Laser Profilometer for Measuring Pavement Rutting (Loop Method)

This test method defines the procedure for performing validation checks of the measurements of pavement rutting determined using a laser profilometer.

Pavement Rutting Repeatability and Bias Error Checks for a Laser Profilometer

This test method defines the procedure for conducting repeatability and bias of measurement checks for rut measurements made by a laser profilometer.

Pavement Surface Texture Measurement with a Laser Profilometer

This test method defines the procedure for measuring the surface macro-texture of road pavements, determined by the direct measurement of the road surface profile using a laser profilometer.

Validation of a Laser Profilometer for Measuring Pavement Surface Texture (Reference Device Method)

This test method defines the procedure for performing validation checks of the measurements of pavement surface macro-texture determined using a laser profilometer, by comparing them to the measurements from a static or manual reference device.

Validation of a Laser Profilometer for Measuring Pavement Surface Texture (Loop Method)

This test method defines the procedure for performing validation checks of the measurements of pavement surface texture determined using a laser profilometer.

Pavement Surface Texture Repeatability and Bias Error Checks for a Laser Profilometer

This test method defines the procedure for conducting repeatability and bias of measurement checks for pavement surface texture measurements made by a laser profilometer.

File Name: 2016 - Australia - Equipment Validation Specifications.zip
File Size: 4.95 MB
File Type: application/zip
Hits: 313 Hits
Download: 286 times
Created Date: 25-06-2019
Last Updated Date: 21-03-2018